BP Energol RC-R 68

BP ENERGOL RC-R 68, Rotary Air Compressor Oil.

High Performance Reciprocating, Rotary and Screw Air-Compressor oils

Description  
Energol RC-R compressor oils are formulated from highly refined mineral base oils and incorporate additives that minimize oxidation, deposit-formation, enhance loading-carrying, and anti-wear properties, combat the effects of water-contamination and prevent corrosion. The formulation gives a balanced combination of anti-foam, air-release and filter blocking properties.
Energol RC-R compressor oils are used sucessfully throughout the world in stationary and
mobile equipment.

Main Benefits
Exceed the requirements of ISO-L-DAG/DAH and DIN 51352
• High resistance to oxidation, hence low deposit-forming tendencies.
• Zinc-free formulation, to minimize oil-filter blockage in the presence of water.
• Excellent anti-wear performance in arduous conditions of heat and moisture, giving long service life for compressors.
• Rapid separation of oil/air in the air-coalescer, long air-filter life and low oil-carryover.
• Powerful water-separation and anti-corrosion characteristics, to counter adverse effects of moisture contamination.

Applications and Approvals
Energol RC-R grades are ashless oils recommended for the lubrication of rotors, bearings
and gears in rotary compressors, especially the oil-flooded screw type with delivery temperatures up to 120°C.
Energol RC-R compressor oils are also be used in reciprocating equipment where the air
discharge temperature is below 120 °C.
The performance of the Energol RC-R oils exceeds the requirements of the draft ISO specification for oil-flooded rotary air-compressors, categories ISO-L-DAG and DAH.
These oils are approved by Atlas Copco, Compair Industrial and Consolidated Pneumatic (CPT).

Storage  
Proper standards of storage and handling are necessary with all lubricants. Packages should be treated with care at all stages, to prevent contamination of their contents and damage to containers. Where outdoor storage of packages is unavoidable, they should preferably be covered. Storage temperatures should not fall below 5°C above the grade's Pour Point, nor exceed 50°C. Any water that is allowed to accumulate on top of a drum can cover the bung and eventually cause the drum markings to obliterate and become illegible. Drums should therefore stand tilted or rest horizontally.

Health, Safety and Environment
Health, safety and environmental information is provided for these products in the Material Safety Data Sheet. This gives details of potential hazards, precautions and First Aid measures, together with environmental effects and disposal of used products.

The British Petroleum Company p.l.c. or its subsidiaries will not accept liability if the products are used other than in the manner or with the precautions or for the purpose/s specified. Before the products are used other than as directed, advice should be obtained from local BP office.

PL/March 95
Superseding Sheet Dated : July 94

This data only provided basic info. And sharing some knowledge, for further information please contact nearest dealer or distributor of lubricants.

BP Energrease LS-EP 2

BP ENERGREASE LS-EP 2 (Lithium EP Grease)

This data only provided basic info. And sharing some knowledge, for further information please contact nearest dealer or distributor of lubricants.

Castrol RX Fuel Saver 10W-40

CASTROL RX FUEL SAVER 10W-40 API CF (DIESEL ENGINE OIL)

This data only provided basic info. And sharing some knowledge, for further information please contact nearest dealer or distributor of lubricants.

Castrol RX New Gen 15W-40

CASTROL RX NEW GEN 15W-40 API CH-4/SG ,(DIESEL ENGINE OIL)

This data only provided basic info. And sharing some knowledge, for further information please contact nearest dealer or distributor of lubricants.

Castrol RX Diesel 20W-50

CASTROL RX DIESEL 20W-50 API CF-4 (DIESEL ENGINE OIL) 

This data only provided basic info. And sharing some knowledge, for further information please contact nearest dealer or distributor of lubricants.

Castrol CRB Turbo 15W-40

CASTROL CRB TURBO 15W-40 API CF (DIESEL ENGINE OIL)

This data only provided basic info. And sharing some knowledge, for further information please contact nearest dealer or distributor of lubricants.

Castrol CRB SAE 40

CASTROL CRB SAE 40 API CF  (DIESEL ENGINE OIL) .

This data only provided basic info. And sharing some knowledge, for further information please contact nearest dealer or distributor of lubricants.

Lubricants Certify Halal For Manufacturing

Refer to the Malaysia Development On Sector Of Islamic Food Industry.

We will arrange those lubricants with the certify are Halal for use in manufacturing. Please contact us if you need any further information.  

Hope to provide our best services to your esteemed company in the future. Our Company as Lubricants Distributor does not only deliver high performance products to meet manufacturing needs, its also constantly works with individual customer to improve work efficiency and reduce total manufacturing cost. Being a customer-oriented lubricant partner.

Thank you.

Castrol Rustilo DWX 30

DESCRIPTION
Castrol Rustilo DWX 30 is a light brown dewatering fluid which, on evaporation of the solvent, deposits an ultra-thin protective film. Castrol Rustilo DWX 30 has very thin, slightly greasy film characteristics.

APPLICATIONS
Castrol Rustilo DWX 30 has been used as a mild press working lubricant where it gives protection to the workpiece without additional treatment. The ultra-thin film gives excellent rust preventive properties for inter-operational protection.

BENEFITS
 A particular feature of Castrol Rustilo DWX 30 is its ability to suppress the corrosion attack that may be caused by fingerprints which is particularly important in the protection of highly finished surfaces.
  Components can be air gauged without removing film.
  Excellent water displacing properties.
 Good demulsification.

TYPICAL DATA
Total Solids %                                                                                      8
Relative Density @ 15°C                                                                  0.812
Flash Point °C (ABEL) Minimum                                                  40
Coverage (Approx.) Sq. Metre/Litre                                            105
Film Thickness (Approx.) Micrometers                                       0.64
Film Density (Approx.) g/Sq. Meters                                           0.64
Drying Time at 21°C Minutes (To 95% Solvent Loss)                30

METHOD OF USE
Castrol Rustilo DWX 30 should be used preferably by immersion, but if impractical can be applied by spraying.  

PROTECTION
 Indoors : 9 months
 Outdoors : 3 months
The period specified for outdoor use assumes primary protection from the elements by tarpaulin or another form of cover.

REMOVAL
Normally not necessary, but if required, petroleum solvents, vapour degreasing or suitable alkaline cleaner may be used.

THIS DATA SHEET DOES NOT CONSTITUTE A CONTRACT IN TERMS OF PROPERTIES

THIS DATA ONLY PROVIDED BASIC INFO. AND SHARING SOME KNOWLEDGE, FOR FURTHER INFORMATION PLEASE CONTACT NEAREST DEALER / DISTRIBUTOR OF LUBRICANTS.

Castrol SE Fluid 180

DESCRIPTION  
Castrol SE Fluid 180 is a very light viscosity “water white” mineral oil with relatively high flash point. It is designed to provide optimum rates of metal removal with minimum electrode wear.

APPLICATION  
Castrol SE Fluid 180 is used as a dielectric medium for electrode discharge machines (normally referred to as EDM). The viscosity of the fluid selected classes Castrol SE Fluid 180 as a universal 
fluid.

Castrol SE Fluid 180 is also can be used as high flash point industrial cleaner and suitable for most general purpose solvent cleaning applications.

BENEFITS
 High electric strength provides a smaller spark gap and promotes accurate copying. 
 Low fire risk and improves operator safety due to the relatively high flash point of this low viscosity fluid.
 Low evaporation rate reduces fluid top-ups.
 Increased health and safety aspect due to low aromatic content.
 Low odour enhances operator acceptance.
 Good oxidation resistance.
 High thermal conductivity allow heat transfers rapidly.
 Do not promote skin irritation or dermatitis due to its chemical purity.

SPECIMEN APPROVALS
Agie
Charmilles
Ingersoll

THIS DATA SHEET DOES NOT CONSTITUTE A CONTRACT IN TERMS OF PROPERTIES

THIS DATA ONLY PROVIDED BASIC INFO. AND SHARING SOME KNOWLEDGE, FOR FURTHER INFORMATION PLEASE CONTACT NEAREST DEALER / DISTRIBUTOR OF LUBRICANTS.

Castrol Spheerol L-EP

DESCRIPTION  
The Castrol Spheerol L-EP grease range consists of lithium base greases containing extreme pressure additives in addition to corrosion and oxidation inhibitors.

APPLICATIONS
Castrol Spheerol L-EP greases are used on bearings operating under heavy and shock load conditions in a variety of automotive, industrial and marine applications.

Frequently used in centralised lubrication systems where their lower consistency and resultant pumpability are essential for distribution through small bore pipework. Suitable for machine slideways where grease is recommended.

BENEFITS

 Excellent protection against rust and corrosion.

 Good resistance to water wash-out, providing adequate lubrication in adverse conditions.

 Extended bearing life even in arduous operating conditions due to extreme pressure additive present.

 Ability to cope with a wide range of applications, thus offering rationalisation of grades.

We have Spheerol L-EP0 (NLGI 0) , L-EP1 (NLGI 1) , L-EP2 (NLGI 2).

THIS DATA SHEET DOES NOT CONSTITUTE A CONTRACT IN TERMS OF PROPERTIES

THIS DATA ONLY PROVIDED BASIC INFO. AND SHARING SOME KNOWLEDGE, FOR FURTHER INFORMATION PLEASE CONTACT NEAREST DEALER / DISTRIBUTOR OF LUBRICANTS.

Castrol Hyspin AWS

DESCRIPTION
Castrol Hyspin AWS is a range of high quality mineral oils. Their natural properties are enhanced by the incorporation of anti-wear, anti-oxidation, anti-foam and anti-corrosion additives. The Castrol Hyspin AWS range is graded according to the (ISO) viscosity classifications.

APPLICATIONS
The Castrol Hyspin AWS range is recommended for the lubrication of:
x Hydraulic systems
x Machine tools
x Centrifugal pumps
x Injection moulding machines
x Gear units
x Centralised bearing lubrication systems, as well as many more applications requiring an oil with good anti-wear and anti-oxidant properties.

BENEFITS
The Castrol Hyspin AWS range offers the following benefits:
x Stock Rationalisation
 Due to wide range of applications, stock holding of different types of oil can be reduced.
x Extended Service Life
 Due to its thermal and oxidation stability, the Castrol Hyspin AWS grades provide extended oil life under the most arduous operating conditions.
x Full Range of Viscosities
 Ensures that the ideal viscosity grade can be selected to optimise machine performance and the pump manufacturer's recommendations are met.
x Comprehensive Additive Package
  Ensures maximum protection from wear, corrosion, foaming and oxidation, resulting in reduced down-time and higher productivity.

Compatibility of Castrol Hyspin AWS with hydraulic components:
x Seals
 Suitable for use with nitrile, Buna-N, viton, EP and Silicone rubbers.
x Paint
 Suitable for use with good quality epoxy resin-based paints.
x Metals
 No effect apart from silver-plated components used in some hydraulic pumps. In such cases use only Castrol Hyspin VG grades.
The Castrol Hyspin AWS range meets and/or exceeds the performance levels of the followings:
  DIN 51524 - 12 STAGES FZG GEAR TEST
  VICKERS VANE PUMP TEST

THIS DATA SHEET DOES NOT CONSTITUTE A CONTRACT IN TERMS OF PROPERTIES

THIS DATA ONLY PROVIDED BASIC INFO. AND SHARING SOME KNOWLEDGE, FOR FURTHER INFORMATION PLEASE CONTACT NEAREST DEALER / DISTRIBUTOR OF LUBRICANTS.

Castrol Magna

DESCRIPTION
Castrol Magna GC 32, BD 68 and CF 220 are specially formulated slideway lubricants for machine tools, designed to work in conjunction with the new generation biostable cutting fluids.

APPLICATIONS
Castrol Magna GC 32, BD 68 and CF 220 are recommended for use in all types of machine tool slideways. The only difference between them is viscosity. Kindly refer to the Machine Manufacturer’s Manual for the correct viscosity grade.

BENEFITS  
§ Specially selected additives to minimise ‘stick-slip’ motion
 Ensures increased accuracy and optimum machine tool performance, resulting in better productivity.

§ Formulated to be compatible with biostable soluble cutting fluids in the event of contamination with the soluble cutting fluid 
 Maximises the life of the soluble cutting fluid saving money on product, labour and downtime. Eliminates problems associated with ‘Tramp Oil’  saving on labour, downtime and product.
 
§ Superior anti-wear and load-carrying characteristics (Exceeds FZG Gear Test - Load Stage 12)
 Extends the life of sliding components saving money on expensive replacement parts, downtime and labour.
 
§ Exceptional anti-corrosion additives to combat the ‘washing-off’ tendency of the new detergent biostable cutting fluids (Passes both Rust Tests IP 135A and IP 135B)
  The Castrol new generation slideway lubricants resist the ‘washing-off’ tendency which ensures protection to slideway components saving money on expensive replacement parts, downtime and labour.  
 
§ Formulated to reduce odours at higher operating temperatures
  Improves operator comfort and environment leading to increased productivity.

§ Approvals by EMCO-Austria, Traub, Maho and Oerlikon-Germany, as well as Brown Boveri-Switzerland.
  Internationally accepted and recommended by major machine manufacturers. Gives local users the peace of mind that these products will perform to their benefits.

THIS DATA SHEET DOES NOT CONSTITUTE A CONTRACT IN TERMS OF PROPERTIES

THIS DATA ONLY PROVIDED BASIC INFO. AND SHARING SOME KNOWLEDGE, FOR FURTHER INFORMATION PLEASE CONTACT NEAREST DEALER / DISTRIBUTOR OF LUBRICANTS.